Dongguan Chitwing Technologies Co., Ltd
Dongguan Chitwing Technologies Co., Ltd
Add to Cart
Transparent Scan Pen
Camera Decorative Ring (1*4)
| Mold base:Standard FCI2530.509080. | Type | Standard | Net weight | ||
| Length | Width | Height | Three-plates mold | LKM | 88kg |
| 250 | 250 | 241 | |||
| IMM Tonnage | Part material | Part size | Part weight | ||
| 110T | POM | 33.65*2.26*14.52 | 0.2g | ||
| Surface finish | A surface polished to 600# sandpaper | Steel of cavity and core | |||
| Secondary surface EDM with Charmilles VDI21# | Harden (1*4/S136) | ||||
| Fully considering customer requirements, the mold is designed pin point gate turning to side gate; the sprue bushing is set in center of mold base. Harden the mold to effectively improve the hardness and anti-wearing performance, so that the tool life > 500k shots; uniform cavity wall thickness, good strength, minimized cold slug, and short cycle time; with smooth part surface and clear details w/o flow marks and fitting tolerance < 0.1mm | |||||||
Display diagram