Dongguan Chitwing Technologies Co., Ltd
Dongguan Chitwing Technologies Co., Ltd
Add to Cart
Transparent POA Rear Pad (1*1)
No.22730-C
| The mold measures 400mm in length, 450mm in width, and 456mm in height. It is a two-plates mold equipped with a cold runner system. The mold base is of standard quality, featuring precise machining and a well-thought-out design that reduces heat loss. A cashew gate is utilized as the gate system. The mold has a tool life of up to 500,000 shots. The surface finish is achieved using A surface EDM to VDI27# standard. Manufactured according to LKM standard, the mold's cavity and core are constructed from hardened steel (1*1/S136). |
| The mold has measurements of 400mm in length, 450mm in width, and 456mm in height. Notable features of the mold include 1 slide, a particle-free surface, and a precise fit. The runner can be reground and recycled, effectively reducing plastic waste. The mold is designed with a standard mold base (CI3545) with dimensions A = 70, B = 140, and C = 120. Its net weight is 520kg, making it suitable for a 110T machine. As for the injection molding parameters, the molded part is composed of TPU A80 material. The dimensions of the molded part are approximately 158.75mm x 127.54mm x 50.81mm, with a weight of 58g. |
| Kindly be advised that the parameters mentioned are tailored to the mold and injection molding process you referenced. |
Display diagram
| The mold has dimensions of 400mm in length, 450mm in width, and 456mm in height. It is a two-plates mold with a cold runner system. The mold base is standard, with good machining and a scientific design that minimizes heat loss. The gate used is a cashew gate. The tool life of the mold is up to 500,000 shots. The surface finish is achieved through A surface EDM to VDI27# standard. The mold is made with LKM standard and the cavity and core are made of hardened steel (1*1/S136). The mold features include 1 slide, a surface free from particles, and a good fit. The runner can be reground and recycled, reducing plastic waste. The mold is designed with a standard mold base (CI3545) with dimensions A = 70, B = 140, and C = 120. The net weight of the mold is 520kg, suitable for a 110T machine. For the injection molding parameters, the molded part is made of TPU A80 material. The size of the molded part is approximately 158.75mm x 127.54mm x 50.81mm, and it weighs 58g. Please note that these parameters are specific to the mold and injection molding process you mentioned. |